Using heat recovery to reduce costs and emissions on dairy farms
29 October 2026

Overview
Hot water is one of the biggest energy drains on a conventional dairy farm. The electric resistance heaters used to bring large tanks up to 60°C and 90°C are energy hungry and inherently inefficient, especially at large volumes. Meanwhile, air-source chillers used to cool milk constantly generate heat in its condenser, which on most farms is lost to the atmosphere.
A research project conducted by the University of Wollongong (UOW), in partnership with the Regional Circularity Cooperative, Bega Group, GeoExchange Australia, and the NSW Decarbonisation Innovation Hub, set out to measure how much energy flows through two commercial dairy farms in the Bega Valley, and whether waste heat could be recovered to reduce on-farm costs and improve operating efficiencies.
The LPI Seed Project LPI-SF04: ‘Waste Heat Recovery and Thermal Energy Sharing towards a Circular Economy’ was led by Dr Emily Yap and Prof Zhenjun Ma from UOW’s Sustainable Buildings Research Centre (SBRC).
The project team installed wireless energy monitoring equipment across both farms to assess thermal processes and identify practical pathways to reduce grid energy consumption and greenhouse gas emissions.
Findings
On the farm with a full heat recovery, thermal storage and solar system installed, net energy consumption was negative across every month measured. Recovered heat and onsite solar generation exceeded the farm’s total energy use for both heating and cooling.
The findings point to a practical, staged pathway for farmers. They can start by recovering waste heat from existing chiller condensers, often using tanks and equipment already on hand, before adding thermal storage and solar integration as investment allows.
Recommendations
The research identified four key steps farmers can take to integrate waste heat recovery, prioritising the retrofit and repurposing of existing equipment where possible.
1. Recover waste heat from the chiller condenser: the most immediate and accessible improvement.
2. Add thermal storage for heating and cooling: decouples grid energy consumption during milking times, enabling off-peak operation and better use of generated solar energy.
3. Integrate thermal storage with heat recovery and solar.
4. Monitor energy use on farm: the wireless monitoring system installed for this project tracked thermal and electrical data every 10 minutes across both farms.
Download the flyer to learn more about this project and its findings.
Download the Flyer